Fusion 360 Tutorial for Robotics (Part 5)

Fusion 360 Tutorial for Robotics (Part 5)

Once you have drawings, components, and a full assembly, it’s time to get it manufactured. Throughout the Fusion 360 Tutorial series, we’ve looked at how to build a robot arm from scratch. In this tutorial, we’re going to explore manufacturing...
Fusion 360 Tutorial for Robotics (Part 4)

Fusion 360 Tutorial for Robotics (Part 4)

Welcome back to another Fusion 360 Tutorial for Robotics! This is the middle of the tutorial series, so if you haven’t checked out the previous parts, I recommend starting there before diving into this lesson. In this lesson, you’ll learn how to create...
Fusion 360 Tutorial for Robotics (Part 3)

Fusion 360 Tutorial for Robotics (Part 3)

In the previous Fusion 360 tutorials, we learned how to draw two components for our robot arm: a robot base and a Nema23 motor mount. In this tutorial, I’m going to teach you how to use drawings to create models in Fusion 360. Rather than walk through each...
Fusion 360 Tutorial for Robotics (Part 2)

Fusion 360 Tutorial for Robotics (Part 2)

In the last Fusion 360 tutorial for beginners, you learned how to create a robot base by drawing, combining, and extruding a square, circle, and rectangle. In this tutorial, we’re going to expand on this skillset by creating a motor mount. This component will...
Should You Upgrade a MacBook Pro in 2019?

Should You Upgrade a MacBook Pro in 2019?

Exactly one year ago, I updated my Mid-2012 MacBook Pro with an SSD. In this article, I want to share my thoughts on whether upgrading your old Mac is worth your time, or if you should buy a new MacBook Pro. Let’s dive into it! Should You Upgrade Your MacBook...

Pin It on Pinterest